Expanded metal pricing guide
Expanded Metal Price & Sheet Quote Guide
This page lists the specification and order conditions required to quote standard and custom expanded metal sheets.
Expanded metal is quoted against a complete specification and delivery basis. Sheet size alone is not enough to establish a price.
01 / Pricing & specification
Expanded Metal Pricing Basis
Expanded metal price is calculated from the material, sheet dimensions, thickness or gauge, SWD, LWD, strand width, surface finish, quantity, packing method and delivery destination. A sheet format identifies the panel dimensions only; it does not identify the mesh specification.
In the local measurement guide and calculator, SWD and LWD refer to bond-center pitches. State clear openings separately as SWO and LWO, and confirm the measurement convention on the drawing.
02 / Pricing & specification
What Affects Expanded Metal Price?
A price comparison is valid only when the material, mesh geometry, thickness, finish, quantity and delivery basis are the same. The following inputs are required for a technical quotation.
Material and Grade
Material grade affects raw material cost, density, corrosion resistance and any subsequent finishing process.
Thickness and Gauge
Base metal thickness or gauge affects sheet weight, load capacity, mesh profile and material consumption.
SWD, LWD and Strand Width
SWD, LWD and strand width define the opening geometry, open area, load path and material consumption.
Sheet Size
Sheet size identifies whether the order is for a standard panel, a custom panel or a cut-to-size project panel.
Raised or Flattened Form
Flattening changes the mesh profile and may affect dimensional tolerances, surface condition and processing requirements.
Finish, Quantity and Delivery
Finishing, packing, order quantity and destination affect processing cost, freight calculation and delivered price.
03 / Pricing & specification
Expanded Metal Sheet Price: Specification Required
Expanded metal sheet price cannot be determined from sheet dimensions alone. Material grade, thickness, SWD, LWD, strand width, mesh form and finish must be stated before a quotation can be prepared.
| Quote input | What to specify | Why it matters |
|---|---|---|
| Material | Carbon steel, galvanized steel, stainless steel, aluminum, or other grade | Changes material cost, weight, corrosion performance and finishing. |
| Mesh pattern | SWD, LWD and strand width | Identifies the opening geometry and material usage. |
| Thickness | Base thickness or gauge, plus raised/flattened form | Changes strength, weight, profile and production method. |
| Surface finish | Mill finish, galvanized, anodized, powder coated or custom | Adds processing, protection and color requirements. |
| Quantity and destination | Sheets, panels, packing, port or delivery location | Determines production planning, packing and freight calculation. |
Quotation note: A universal price cannot be assigned to expanded metal without a complete mesh specification and delivery basis. Confirm the final price against the supplier quotation.
04 / Pricing & specification
Price by Expanded Metal Material
Material categories
- Carbon steel expanded metal for general industrial use and fabrication.
- Galvanized expanded metal for added corrosion protection.
- Stainless steel expanded metal for demanding corrosion and hygiene conditions.
- Aluminum expanded metal when lower density and corrosion resistance are important.
Basis of comparison
Compare aluminum, carbon steel and stainless steel using the same sheet dimensions, SWD, LWD, strand width, thickness, finish, quantity and delivery basis. Price per sheet alone does not establish equivalent weight, strength or corrosion performance.
Use the expanded metal weight calculator for an estimated weight comparison.
05 / Pricing & specification
Information Required for an Expanded Metal Quotation
Specification checklist
- Material and grade
- Raised or flattened expanded metal
- SWD, LWD and strand width
- Thickness or gauge
- Sheet or panel width and length
- Surface finish, coating and color
- Quantity, application and destination
Submit a Complete Specification
Send the drawing, sample photo or written specification with the material, mesh dimensions, quantity and destination. YueChu Metal will use these details to prepare the quotation.
Quotation questions
Expanded Metal Price and Quotation FAQ
How is expanded metal price determined?
Price is determined by material, sheet size, thickness or gauge, SWD, LWD, strand width, surface finish, quantity, packing method and delivery destination. A complete specification is required for a quotation.
Why is a sheet size alone not enough for a quote?
Sheet dimensions do not identify material grade, thickness, SWD, LWD, strand width, raised or flattened form, finish, quantity or delivery destination. These details are required to quote the sheet.
How should aluminum and carbon steel expanded metal prices be compared?
Use the same sheet dimensions, SWD, LWD, strand width, thickness, finish, quantity and delivery basis. Material cost, density and finishing requirements can differ between aluminum and carbon steel.
What should I send for an expanded metal quotation?
Send material and grade, mesh type, sheet dimensions, thickness or gauge, SWD, LWD, strand width, surface finish, quantity, application and destination. Drawings or sample photos can be used to verify the mesh.
Can weight be estimated before requesting a quotation?
Yes. The expanded metal calculator estimates weight per square meter, total sheet weight and open area from the entered mesh dimensions and material density. The supplier should confirm the production value.
Continue your specification
Related Technical Resources
Need custom specifications?
Request an Expanded Metal Quotation
Share the material and grade, raised or flattened form, mesh dimensions, thickness, sheet size, finish, quantity and destination. Include a drawing or sample photo so the specification can be checked before quotation.